TM2361 (24JUN08) 9015-20-108 450DLC Excavator Operation and Tests 062608 PN=598 References Rear Cover Remove and Install 1. Remove fuse cover (7). 2. Loosen cap screws (3) at bottom of rear cover. 3. Remove plugs, o-rings, and screws (4). 4. Lift and remove diffuser (1). –UN–23MAR06 5. Disconnect electrical connections to power outlet (5) and lighter (6). 6. Lift and remove rear cover (2). TX1005108A 7. Repair or replace parts as necessary. Rear Cover 8. Install rear cover. 1—Diffuser 9. Connect electrical connections. 2—Rear Cover 3—Cap Screw (2 used) 9015 20 ,108 10. Install diffuser. 4—Plug, O-ring, and Screw (6 used) 5—Power Outlet 6—Lighter 11.
Install cap screws, plugs, o-rings, and screws. 7—Fuse Cover 12. Install fuse cover. LD30992,0000430 –19–27MAR06–1/1