TM2361 (24JUN08) 9015-20-125 450DLC Excavator Operation and Tests 062608 PN=615 References Replace (Push Type) Metri-Pack Connectors Disconnect the Metri-Pack1 connector. Remove the tie bands and tape. –UN–29JUN92 Remove the connector lock (A), and mark wire colors for identification. Identify wire color locations with connector terminal letters. RW21325 Insert JDG776 or JDG7772 Terminal Extraction Tool (B) into connector body socket (C) pushing the terminal A—Connector Lock locking tab inward. B—Extraction Tool JDG777 C—Connector Body Socket NOTE: Use JDG776 Extraction Tool with 56, 280 and 630 D—Terminal series METRI-PACK terminals.
Use JDG777 E—Locking Tab Extraction Tool with 150 series METRI-PACK terminals. Remove extraction tool and pull terminal (D) out of the socket. Replace terminal. Make sure locking tab (E) on the new terminal is in the outward position. Push terminal into connector body socket until terminal locks. 1Metri-Pack is a trademark of Packard Electric 2Included in JT07195A Electrical Repair Kit LD30992,0000243 –19–31MAR06–1/1 9015 20 ,125