John Deere 450DLC — Replace CINCH™ Connectors

References 4. Insert pointed side of extraction tool into the contact cavity so that the flat side of tool faces secondary lock cavity (4). This will release the primary contact locking tab. 5. Gently pull wire out of the connector. T132107B –UN–29JUN00 6. Repair/Replace terminals as necessary using procedure in this group. 7. Insert contact and wire into connector until it clicks. 8. Install secondary lock. LD30992,0000244 –19–31MAR06–3/3 9015 20 ,127 TM2361 (24JUN08) 9015-20-127 450DLC Excavator Operation and Tests 062608 PN=617