DETAILED CONTROLS AND GAUGES 3.2.2 SWITCHES (1) (2) (3) (4) Starting Switch Horn Switch Lamp Switch Travel Speed Selector Switch (5) (6) Cab Heater Switch (Machines equipped with cab) Windshield Wiper Switch (Machines equipped with cab) Room Lamp Switch (Machines equipped with cab) Cigarette Lighter (12V) (Machines equipped with cab) (7) (8) 1. Starting Switch This switch (1) is used to start or stop the engine. OFF position The key can be inserted or withdrawn. The switches for the electric system are all turned off and the engine is stopped. ON position Electric current flows in the charging and lamp circuits. Keep the starting switch key at the ON position while the engine is running.
START position This is the engine-start position. Keep the key at this position during cranking. Immediately after starting the en- gine, release the key. It will automatically return to the ON position. HEAT (preheat) position When starting the engine in cold weather, turn the key to this position. When the key is set to the HEAT position, the preheating monitor lights up. Keep the key at this position until the preheating monitor goes out. When the preheating monitor goes out, release the key. When the key is released, it will return to the OFF position, so turn it immediately to START and start the engine. 64