www.changlin.com.cn 24mm Remove the pump timing pin plug. Reverse the position of the timing pin and install the pin, plug,and sealing washer. Torque Value: 15N.m [11ft-lb] 22 mm, 27 mm or 30 mm Tighten the fuel pump drive nut. Torque Value: PES. A Pump, 95N-m [52 ft-lb] PES. MW Pump, 105N*m [77 ft-lb] PES. P Pump, 178N-m [144 ft-lb] Install the gear cover access cap hand tight. lines do not contact each other or another component. 115 / 149 pages 17 mm (PES. A , PES. MW), 19 mm (PES. P) Install the high pressure lines to the fuel pump. Install the fuel supply and fuel return lines. NOTE: If removed , reinstall the support clamp in the original orque Valu e:
ine Fittings) 30N*m [22 ft-lb] upport clamp) 6N-m [48 in-lb] uel Supply and Fuel Return Banjo) 24N-m [18 ft-lb]