Argo Service Manual Electrical System Photo 5 Installing the Brake Cooling Fan 1. Reinstall the mounting bracket to the brake cooling fan. 2. Place the blower fan/bracket assembly back into the vehicle and rivet back into posti- tion. 3. Position the outlet of the fan down towards the front of the vehicle and tighten the mounting bracket to secure it in that position. 4. Connect the brake cooling outlet hose and secure with the gear clamp. 5. Connect the intake hose and secure with the gear clamp. 6. Reconnect the wiring. 7. Replace hood. Removing the Engine Starter Motor 1. Remove the vehicle hood. 2. Locate the starter motor at the front of engine. 3.
Disconnect all wiring at the starter solenoid post. Photo 6 Photo 6 Ontario Drive & Gear Limited www.argoutv.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-13