General Information 00 Initial Maintenance (IM) Operations Table: 00–09 IMPORTANT: After performing all operations in this table, perform all daily and weekly maintenance op- erations listed in the "Pretrip Inspection and Daily Maintenance" chapter of the Business Class Trucks Driver’s Manual. Also, perform all M1 Maintenance Interval Operations at the Initial Maintenance (IM). NOTE: Numbers in this table are maintenance opera- tion reference numbers matching those in the text of this manual. The Initial Maintenance consists of all M1 Operations plus the other operations listed below. Initial Maintenance (IM) Operations Maint. Oper. No.
Initial Maintenance (IM) Operations 00–10 Perform All M1 Operations 25–02 Clutch (Pull-Type) Inspecting and Adjusting 26–02 Eaton Fuller and Meritor Transmission Oil Changing and Magnetic Plug Cleaning 26–08 Aisin Transmission Fluid and Filter Changing and Magnetic Plug Cleaning 31–01 Frame Fastener Torque Checking 32–03 U-Bolt Torque Checking 33–04 All-Axle Alignment Checking 35–03 Axle Lubricant Changing and Magnetic Plug Cleaning 35–04 Two-Speed-Axle Shift Unit Oil Level Checking Business Class Trucks Maintenance Manual, February 2004 00/16