63 10 500 Checking headlight beam angle, adjusting if necessary Checking tightness of rear wheel studs X Tightening torque: Securing screws for rear wheel .................. 105 Nm 2 1 Checking tyre pressures • Check/correct tyre pressures. Tyre pressures: Solo ..................................... front 2.2 bar (31.3 psi) ............................................. rear 2.5 bar (35.6 psi) R28000070 With pillion passenger .......... front 2.5 bar (35.6 psi) ............................................. rear 2.7 bar (38.4 psi) With pillion passenger and luggage................................ front 2.5 bar (35.6 psi) .............................................
rear 2.9 bar (41.2 psi) • Motorcycle must be on a level surface. • Motorcycle with driver (approximately 85 kg/ 187 lbs). • Remove trim (1). • Remove headlight (2) retaining bolts. • Correct the headlight range by swivelling the headlight. R28000080 Setting for headlight beam angle adjuster .. .-25 cm (9.8425 in) at a distance of 10 m (32.8 ft) 00.19