Setup Initial setup The initial MFP setup includes the following steps: Remove the MFP from the box. Set up and install the MFP. Set up and install the finishing device. Verify installation. Familiarize yourself with the MFP. Note The initial setup package does not include any software or network setup. Do not load any printer software or connect the MFP to the network, even if the customer has an existing network connection in use. If an administrator does not, problems can occur to the network connection. The shipping box contains the following items:
HP LaserJet 9000mfp One or two power cords Note The 110-volt MFP has two power cords, and the 220-volt MFP has one y-power cord. ADF output bin High-speed copy connect cable Control panel overlay Print cartridge Printer software on CD-ROM (includes the user introduce guide) Start guide Finishing device Note The finishing device is delivered in a separate box. Note The MFP is delivered with the duplexer, tray 1, and tray 4 installed. 30 Chapter 2 Product requirements C8523-90921