Supermicro A+ Server 2021TM-BTRF/BIBXRF — Supermicro A+ Server 2021TM-BTRF/BIBXRF User Manual PDF

Chapter 5: Advanced Serverboard Setup Overheat/Fan Fail LED (OH) Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide advanced warning of chassis overheating. Refer to the table on the right for pin defi nitions. NIC2 (JLAN2) LED The LED connections for JLAN2 are on pins 9 and 10 of JF1. Attach an LED cable to display network activity. See the table on the right for pin defi nitions. NIC1 (JLAN1) LED The LED connections for JLAN1 are on pins 11 and 12 of JF1. Attach an LED cable to display network activity. See the table on the right for pin defi nitions. HDD LED The HDD LED connection is located on pins 13 and 14 of JF1. This LED is used to display all IDE and SATA activity.

See the table on the right for pin defi nitions. Power On LED The Power On LED connector is located on pins 15 and 16 of JF1 (use JLED for a 3-pin connector). This connection is used to provide LED indication of power being supplied to the system. See the table on the right for pin defi nitions.

5-15 OH/Fan Fail LED Pin Defi nitions (JF1) Pin# Defi nition 7 Vcc 8 Ground OH/Fan Fail Indicator Status State Defi nition Off Normal On Overheat Flashing Fan Fail NIC2 LED Pin Defi nitions (JF1) Pin# Defi nition 9 Vcc 10 Ground NIC1 LED Pin Defi nitions (JF1) Pin# Defi nition 11 Vcc 12 Ground HDD LED Pin Defi nitions (JF1) Pin# Defi nition 13 Vcc 14 HD Active Power LED Pin Defi nitions (JF1) Pin# Defi nition 15 5V Stby 16 Control