cisco — Configuring Login Authentication Using AAA

mode. If server-group configurations are disabled in global configuration mode but are available in server-group configuration mode, all configurations in server-group configuration mode are applicable. After the domain stripping and broadcast accounting are configured, you can create separate accounting records as per the configurations. If both domain-stripping and directed-request commands are enabled, domain stripping takes precedence and directed request functionality will not work. How to Configure Authentication Configuring Login Authentication Using AAA The AAA security services facilitate a variety of login authentication methods.

Use the aaa authentication login command to enable AAA authentication no matter which of the supported login authentication methods you decide to use. With the aaa authentication login command, you create one or more lists of authentication methods that are tried at login. These lists are applied using the login authentication line configuration command. To configure login authentication by using AAA, use the following commands beginning in global configuration mode: Procedure Configuring Authentication How to Configure Authentication Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted.

Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa new-model Example: Device(config)# aaa new-model Enables AAA. Step 4 aaa authentication login{default | list-name} method1[method2...] Example: Device(config)# aaa authentication login default local Creates a local authentication list. Step 5 line [aux | console | tty | vty] line-number [ending-line-number] Example: Device(config)# line vty 1 Enters line configuration mode for the lines to which you want to apply the authentication list. Configuring Authentication 17