cisco — Configuring RADIUS Login Authentication

Before you begin To secure the device for HTTP access by using AAA methods, you must configur the ip http authentication aaa global configuration command. Configuring AAA authentication does not secure the device for HTTP access by using AAA methods. Procedure Configuring RADIUS Configuring RADIUS Login Authentication Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa new-model Example: Device(config)# aaa new-model Enables AAA. Step 4 aaa authentication login {default | list-name} method1 [method2...] Example:

Device(config)# aaa authentication login default local Creates a login authentication method list. • To create a default list that is used when a named list is not specified in the login authentication command, use the default keyword followed by the methods that are to be used in default situations. The default method list is automatically applied to all ports. • For list-name, specify a character string to name the list you are creating. • For method1..., specify the actual method the authentication algorithm tries. The additional methods of authentication are used only if the previous method returns an error, not if it fails. Select one of these methods: • enable:

Use the enable password for authentication. Before you can use this authentication method, you must define an enable password by using the enable password global configuration command. • group radius: Use RADIUS authentication. Before you can use Configuring RADIUS 27