Procedure Removing Web-Based Authentication Cache Entries Follow these steps to remove web-based authentication cache entries: Procedure Web-Based Authentication Removing Web-Based Authentication Cache Entries Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 ip admission auth-proxy-banner http [banner-text | file-path] Example: Device(config)# ip admission auth-proxy-banner http C My Switch C Enables the local banner.
(Optional) Create a custom banner by entering C banner-text C (where C is a delimiting character), or file-path that indicates a file (for example, a logo or text file) that appears in the banner. Step 4 end Example: Device# end Exits global configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 clear ip auth-proxy cache {* | host ip address} Example: Device# clear ip auth-proxy cache Delete authentication proxy entries. Use an asterisk to delete all cache entries. Enter a specific IP address to delete the entry for a single host.
Web-Based Authentication 21