2 Common Specifications of IAG 2-2-2 Target Devices The following devices can be set as target devices. *1. You can specify up to three NJ/NX-series CPU Units in total. *2. You cannot perform a backup, restore, or comparison on the NX-series Communication Control Units. *3. You can also set an NX-series Safety Control Unit that is connected to an NX-series CPU Unit. Precautions for Correct Use • You need to insert an SD Memory Card to the NA-series Programmable Terminal and the NJ/NX-series CPU Unit that are set as the target devices.
• To execute a backup or comparison for an NX-series Safety Control Unit connected to an NX- series Communication Control Unit, the NX-series Communication Control Unit must have the SD Memory Card inserted. 2-16 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127) Name Model Version NJ101/ 301/ 501-££££ NX102-££££ NX701-££££ NX-CSG£££ NX-SL5£££ NA5-7W/9W/12W/15W(-V1) HMC-SD291/491 FZ-MEM2G/8G The operation has been tested by the following FTP server: Windows Server 2016 IIS Ver.10.0 SYSMAC-SE2£££