Ref :UM-CT7-11-001 Issue : 01 Date : 28/04/2011 Page 17 of 35 6.2.3 Date Time Date Time operation allows setting or resetting the date and the time. Pressing the joystick LEFT activates setting and entering the selected values (red highlight). Increment Previous Next Press-ENTER : to validate Decrement Pressing ENTER finish the date and time edition – red highlight disappears. Pressing ENTER again, takes us back to MEASURE menu. 6.2.4 Calibrate The instruments performs calibration : by measuring 15 times the known mirror, the channels calibrations coefficients are set and stored. The reference reflectivity values are stored in nonvolatile memory.
The reference values and actual coefficients may be read in CT7 Console Device Management window. This document is OPO property. It may not be either used or copied without authorization. OPO sprl, Crawhez 9, 4890 Thimister Clermont, Belgium. +32 87688989 - +32 87598990