Ref :UM-CT7-11-001 Issue : 01 Date : 28/04/2011 Page 6 of 35 3.2 Quick Start. First measurement The CT7 is normally in sleep mode and can be awakened by pressing the joystick up . Power ON At the first Power ON , if necessary, the instrument prompts for time setting. (Only when the time introduced, CT7 is ready for the measurements.) Than CT7 is ready to perform quick “One click” measurement with the active Cart of wavelength selection. By default, the NORMAL measurement configuration is active i.e. 7 bands in reflectivity and 7 bands in scattering. The MEASURE option is highlighted and may by triggered when pressing the joystick ( Enter ).
Trigger the measure still keeping CT7 in your hand, : you have 5 seconds to place the instrument gently on the mirror. After the measurement, the results are displayed and stored with the time stamp and Cart ID . Pressing joystick (ENTER) returns to the menu. The measurements are performed as specified by a user’s Cart indicating the wavelengths and type of measurements to be performed and bearing an identifier. The user can create and select as many Carts as needed( 64). Carts are created or suppressed from PC application CT7‐Console. The new instrument comes with a default permanent Cart list starting with NORMAL that provides all measurements at all wavelength.
This document is OPO property. It may not be either used or copied without authorization. OPO sprl, Crawhez 9, 4890 Thimister Clermont, Belgium. +32 87688989 - +32 87598990