Chapter3 Handling 8 Change the other settings to make them suitable for your label paper. The following introduces setting menus that are unique to the printer. For the explanation of the other menus, refer to the Help. • To change the paper source setting of the printer, change it using Epson Label Printer Utility. ( "Epson Label Printer Utility" on page 179 ) • You can change the default [Media Coating Type] setting of the printer driver following the procedure below. 1. From the Apple menu, select [System Preferences] - [Printers & Scanners]. 2. Select the printer, and then click [Options & Supplies] - [Option]. 3. Change the setting.
• If setting menus described here are not displayed in the list, the dedicated printer driver for this printer has not been added. Add the dedicated printer driver following the procedure in "Selecting the Dedicated Printer Driver" on page 176 . Select the type of paper you use. For the other settings, refer to the Help. When printing on die-cut labels, set [Media Saving] to [No Saving]. Setting to the other option may cause the print position to shift. CAUTION This menu is enabled if you have selected [EPSON Color Controls] in the [Color Matching] menu. You can adjust color settings such as brightness and saturation. For more details, refer to the Help.
For information on color correction, see "Color Correction" on page 277 . 174 1 Print Settings 2 Color Options