Chapter 2 Handling When Connecting to TM-m30II (For DM-D70 that came with ferrite core) If your DM-D70 came with a ferrite core, and you want to connect the DM-D70 to TM-m30II, attach the ferrite core to the DC cable of the TM-m30II. Bring the ferrite core as close as possible to TM-m30II. 1 Turn off the TM-m30II printer, and disconnect the AC cable of the AC adapter from the power outlet. 2 Put the DC cable of TM-m30II into the ferrite core. 3 Wrap the cable around the ferrite core once. 4 Close the ferrite core until it clicks. 5 Connect the AC cable to a power outlet. 13