Using Windows 95 Using the Docking Solutions 15. Click Finish. 16. Enter the \HP\DRIVERS\W95\DOCKING\SCSI directory on the Recovery CD and click OK. 17. Click Yes to Restart. To configure a docked hardware profile When Windows 95 installs a new Dock device (such as a network card), it may include the device in both the docked and undocked configurations. To prevent problems when undocking, remove the device from the undocked configuration. You will also need to remove the SCSI controller from the undocked configuration. This problem has been improved in Windows 95B OEM Service Release 2.5, but may still occur. 1. Double-click My Computer, Control Panel, System. 2.
Click the Device Manager tab and find the device you installed. 3. Select the card, then click Remove. 4. When the Confirm Device Removal box appears, select Remove From Specific Configuration. 5. If the Remove From Specific Configuration is not an option, then Windows 95 has configured the card correctly. Choose Cancel. -or- Note Do not remove devices such as the keyboard, mouse, or display from any configuration. Under Configuration, select Undocked, then choose OK. Refer to your Microsoft Windows 95 documentation for more information about configuring hardware profiles and installing drivers. 128 Corporate Evaluator’s Guide