EA180 Series Servo Drive Users Manual 9.3 Servo motor specifications SER 08 - 0R7- 30 - 2 F 1 A Y -XX 10 1 2 3 4 6 7 5 8 9 *1: Non-standard product, not recommended. *2: Some varieties may have double round keyways, but except the 130 flange motors, the width and height of the key are the same as those of the U keyway. See Chapter 10. 9.3.1 Common characteristics of servo motors: The above 10 elements are not optional, please refer to the selection guide or consult SINEE. 9.3.2 Brake specifications: *: For 7.5 KW servo motor only. 110 ① Product series ② Motor flange size ③ Rated output power SER: Standard servo motor SES: High performance servo motor 04: 40mm 06: 60mm 08: 80mm 09: 86mm 11:
110mm 13:130mm 18: 180mm 20: 200mm 005: 50W 0R1: 100W 0R2: 200W 0R4: 400W 0R7: 750W 1R0: 1000W 1R5: 1500W 2R0: 2000W 3R0: 3000W 4R4: 4400W 5R5: 5500W 7R5: 7500W 011: 11kW ④ Rated motor speed 10: 1000rpm 15: 1500rpm 20: 2000rpm 25: 2500rpm 30: 3000rpm ⑦ Inertia type A: Low inertia B: Medium inertia C: High inertia ⑤ Voltage level 2: 220V 3: 380V ⑨ Optional ⑧ Axis end None: No option 1: With brake (DC24V) 2: With oil seal 3: With a brake and oil seal ⑥ Encoder type X: Shaft without keyway*1 Y: Shaft with U-shaped keyway and screw hole*2 Z: Shaft with double round keyways and screw hole A: 2500ppr incremental B: 17-bit incremental F: 23-bit absolute G*1:
2500ppr wire-saving encoder ⑩ Special specifications Insulation grade of motor F Class Insulation withstand voltage 1500V 60s Insulation resistance DC500V, above 10MΩ Temperature resistance grade of motor B Protection level Fully enclosed self-cooling IP65 (except shaft through part) Operating environment Ambient temperature 0-40 ° RH 20-80% (no condensation) Installation method Flange installation It rotates counterclockwise (CCW) when viewed from the load side under the forward rotation command.
Rotation direction Motor flange 40 60 80 86 110 130 180 180 size Rated voltage DC 24 ~ 26.4 V Static friction 0.35 N.m 2 N.m 3 N.m 3 N.m 10 N.m 20 N.m 40 N.m 80 N.m* torque Rated power 3.5 W ± 7% 6.3 W ± 7% 10.4 W ± 7% 10.4 W ± 7% 11.6 W ± 7% 19.5 W ± 7% 25W ± 7% * 49W ± 7% * Closing voltage 18V DCmax Release voltage 1.5 V DCmin Standard action 150ms time