Technical Manual for EA350 Analog Pulse Type Servo Driver V101 1.3 About the servo motor 1.3.1 Nameplate description Note: Texts on the actual product nameplate may differ from those shown in the figure in respect of layout and content. 1.3.1 Model description *1: It is not recommended to choose any non-standard variety. *2: Partial varieties can be of double-circular key slots; except for motors with flange 130, the key width and height are the same with the U- shaped key slots; for details, refer to Chapter 12. *3: Only provided for motors with flanges of specification 80 or below. *4: Only provided for motors with flanges of specification 130 or above.
To be customized, not an off-the-shelf product. Elements of the 10 servo motor models are not subject to causal combination. For details, refer to the selection guide or consult us. 13 The 1st place represents the series 2nd place: size of motor flange 3rd place: rated output power of motor SER: Standard servo motor SES: High-performance servo motor SEC: Large-power servo motor 04: 40mm 06: 60mm 08: 80mm 09: 86mm 11: 110mm 13: 130mm 18: 180mm 20: 200mm 23: 230mm 26: 266mm 005: 50W 0R1: 100W 0R2: 200W 0R4: 400W 0R7: 750W 1R0: 1000W 1R5: 1500W 2R0: 2000W 3R0: 3000W 4R4: 4400W 5R5: 5500W 7R5: 7500W 011: 11kW 029: 29kW 4th place: rated speed of motor 10: 1000rpm 15: 1500rpm 20: 2000rpm 25:
2500rpm 30: 3000rpm 7th place: inertia type 5th place: voltage level A: Low inertia B: Medium inertia C: High inertia 2: 220V 3: 380V 9th place: optional accessory Null: No optional accessory 1: With holding brake (DC24V) 2: With oil seal 3: With holding brake and oil seal 4: With fans*4 5: with fan and brake*4 6th place: encoder type 8th place: output shaft type B: 17-bit incremental encoder*3 F: 23-bit absolute type encoder X: Optical axis, without key slot *1 Y: With U-shaped key slot and screw hole *2 Z: With double-circular key slot and screw hole Tenth place: special specification