6.2 Display of total operating time This time is displayed with a sequence of two digits at a time: the first two digits indicate thousands and hundreds, the second two digits indicate tens and units. For example, if the operating time is 6,550 hours, the display will show the following sequence: At the end of phase three (after the tens and units are displayed), the cycle is repeated. To return to normal mode, either: switch the appliance off or press a button or turn the selector knob. A.D.L. 10 / 2010 15/26 599 73 54-08 Phase 1 → Phase 2 → Phase 3 → For two seconds, the following is displayed: Hr For two seconds, the following digits are displayed:
ª thousands (6) ª hundreds (5) For the next two seconds the following digits are displayed: ª tens (5) ª units (0)