EM500 Open-Loop Vector Control Inverter User Manual F00.05=0: Numeric Frequency Setting F00.07 F00.07. Auxiliary frequency source B is determined through numeric frequency setting F00.05=1: AI1 F00.05=2: AI2 F00.05=3: AI3 158 AI3; it works the same way as that for F00.04=3. 55: Switch Main Frequency Source to High-Frequency Pulse Input If enabled, main frequency source A is determined by the percentage inputted through high-frequency pulse input; it works the same way as that for F00.04=5. 6 56: Switch Main Frequency Source to Communication Setting If enabled, main frequency source A is determined through communication; it works the same way as that for F00.04=6.
7 -- If neither of terminals above is enabled, main frequency source A is determined through F00.04. 8 No. Function Range Unit Default Type F00.05 Auxiliary Frequency Source B 0: Numeric Frequency Setting F00.07 1: AI1 2: AI2 3: AI3 4: AI4 (Expansion Card) 5: High-Frequency Pulse Input (X7) 6. Auxiliary Frequency Communication Percentage Setting 7. Direct Auxiliary Frequency Communication Setting 8: digital Potentiometer 9: Not Used 10: Process PID 11: Simple PLC 0 〇