User Manual of EM730/EM730E Series Inverter Output frequency Linear acceleration and deceleration S-curve acceleration and deceleration t1 t2 t3 t4 Acceleration time Deceleration time Fig. 7-16 Acceleration/Deceleration Time Control Diagram F04.19=0: deceleration to stop The motor decelerates to stop according to the set deceleration time [default setting: based on F00.15 (deceleration time 1)]. F04.19=1: free stop When the stop command is valid, the inverter will stop output immediately, and the motor will freely coast to stop. The stop time depends on the inertia of the motor and load.
182 Function Default Function code name Parameter description Unit Attribute code setting F04.19 Stop mode 0: slow down to stop 1: Free stop 0 〇