Installation Environment Mounts Specifications When powerful light of over 800 lux shines on the projection surface or around the projection surface (10 cm to the left or right, 10 cm from the bottom, or 3 cm from the top), the interactive function may not operate correctly. Close curtains to shut out direct sunlight, and turn off fluorescent lights. Or install the projector in a location that is not subject to direct sunlight or fluorescent lights. Setting Plate (ELPMB62) Projection Surface For ultra-short focus projectors, if the projection surface is uneven, the image may appear warped. We recommend using screens that can easily be kept smooth such as a magnetic screen or a board screen.
When Installing Multiple Projectors When installing two or more projectors in parallel, see "Internal Specifications" p. 6 for details on the operating temperature. If the environment is too hot, the projector may overheat and the power may turn off without warning. When installing two or more projectors in parallel, leave a gap of at least 1,500 mm between the projectors. 1500mm If you cannot secure a gap of approx. 1,500 mm, install a partition to block the heat vented from the projector's air exhaust vent. The partitions should be larger than the exhaust vent (approx. 20 mm in all directions), and installed approximately 400 mm from the exhaust vent and 200 mm from the intake vents.
400mm 200mm 20 Item Specifications Dimensions W550×D906×H280 mm Supported screen size EB-755F/EB-750F/EB- 735F 16:9 65" to 120" 4:3 54" to 98" 16:10 65" to 110" 16:6 60" to 110" EB-735Fi 16:9 65" to 100" 4:3 54" to 98" 16:10 65" to 100" 16:6 60" to 110" EB-725Wi 16:10 65" to 100" 4:3 58" to 100" 16:9 64" to 100" EB-725W 16:10 65" to 120" 4:3 58" to 106" 16:9 64" to 116" EB-720 4:3 65" to 110" 16:10 62" to 103" 16:9 60" to 101" Weight (setting plate, hexagonal axis, adjustment unit, wall plate, wall plate cover, end cap) Maximum load capacity Approx. 9.2 kg Approx.
15.0 kg Mini PC installation Screw holes for installing plate PC (VESA compliant) Supported PC sizes Supported PC weight 75mm×75mm 100mm×100mm Supported PC sizes Within 150×150×44mm Supported PC weight 0.7kg or less