EPSON ELPWP20 Quick Start Guide

Wireless Presentation System Quick Start Guide EN FR DE ES IT PT TC KO JA © 2021 Seiko Epson Corporation

Page 1

English This product allows you to wirelessly project a computer screen onto a large screen. By simply plugging the wireless transmitter into your computer, you can project the computer's screen onto an external display device connected to the base unit. 10 6 8 2 4 EN 0 10 8 6 4 2 0 Safety Instructions All safety and operating instructions supplied should be read before using this product. After you have read all instructions, save this information for later reference. Safety Symbols To prevent personal injury or damage to property, the following symbols are used to indicate dangerous operations or handling. Make sure you understand them properly before reading the guide.

Warning Do not use a power source with a voltage other than those specified in the guide. Use of a different power source may result in fire or electric shock. Do not use any AC adapter other than the AC adapter (PSAC30U-120L6) supplied. Doing so may cause the device to malfunction, overheat, or emit smoke resulting in a fire or electric shock. Check the specifications of the power cord. The power cord supplied with the product is intended to comply with power supply requirements for the country of purchase. Using an inappropriate power cord could result in fire or electric shock.

Special expertise is required to install the base unit in high locations such as when installing on a ceiling or a wall. If installation work is not carried out correctly, the projector could fall down. This may result in injury or accidents. If you apply lubricants, oil, or adhesives to the fixing points for the mounts to prevent the screws from loosening and so on, the housing may crack and the base unit may fall causing an accident or injury to occur. When adjusting the mount, do not use lubricants, oil, or adhesives to prevent the screws from loosening, and so on. May exert electromagnetic interference on, and cause malfunction of, cardiac pacemakers.

Before using this unit, check that there is no one in the vicinity using a cardiac pacemaker. May exert electromagnetic interference on, and cause malfunction of, sensitive medical equipment. Before using this unit, check that there is no sensitive medical equipment in the vicinity. 2 Show Meaning Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. Caution This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

Page 2

Electromagnetic interference may cause automatically controlled equipment to malfunction which could cause an accident. Do not use the device near automatically controlled equipment such as automatic doors or fire alarms. Never attempt to disassemble or modify this product. Caution Disconnect the plug and AC adapter from the outlet when it will not be used for extended periods. The insulation may deteriorate, which may result in fire. EN Preparing the External Display Device Prepare an external display device for projecting the computer screen. For example:

Projector, large monitor, and so on Specifications for the External Display Device 3 Item Specifications Input resolution Supports 1920 × 1080 @60Hz RGB

Page 3

Product Parts and Functions Base Unit Parts - Front/Top EN Base Unit Parts - Base 4 Name Function A Indicator Displays the base unit's status. Lit blue Normal status when the power is on. Flashing blue Warming up or cooling down. Off Standby or sleep mode. Lit orange High temperature abnormality (overheating) has occurred. Flashing orange Internal base unit error. B Power button Turns the base unit on or off. C Remote receiver Receives signals from the remote control. D Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington.

Name Function A Mount fixing points Hook on the supplied mount when installing the base unit on the ceiling or wall. B Rubber feet When setup on a surface such as a desk, these feet support the base unit.

Page 4