User's Guide Network Settings Select Set up Scanner connection again (for new network router or changing USB to network, etc.) on the Install Software screen, and then click Next . Follow the on-screen instructions. Disabling the Network Setting from the Control Panel You can disable the network settings. 1. Press the button for more than 3 seconds to disable a Wi-Fi and AP mode connection. The light and light turn off when these are disabled. Note: Press the button to re-connect Wi-Fi and AP mode. Restoring the Network Settings from the Control Panel You can restore all network settings to their defaults. 1. Turn the scanner off. 2.
While holding down the button, press the button until light and light turn on simultaneously. The light and light flash alternately and then turn off when restoration is complete. 72