^MP [Name] Enable/disable buttons [Format] ^MP o [Function] Enables/disables the buttons. If W, F, X, or M is specified for Parameter o, that button is disabled. If S is specified for Parameter o, all buttons are disabled. If E is specified for Parameter o, all buttons are enabled. [Response] None [Reference] Related commands: None [Note] The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the “^JU” command section for details. [Usage example] An example of sending data that enables/disables the buttons and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^MPW 1. Sets the pause button to .
^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev. L Page 180 Parameters Description Definition range o Disabled button o = W/F/X/M/S/E W: Disable pause button F: Disable feed button X: Disable cancel button M: Disable menu button S: Disable all buttons E: Enable all buttons