Document scanner assemblies Printer door Removal of the printer door begins at the bottom of the product. Cables that control the control panel, scanner, and document feeder are attached to the formatter at the bottom of the product. 1 Remove the DIMMs, the back, right, and left covers, the internal paper guide, and the top cover (see pages 89 through 95). 2 Close the printer door. 3 Turn the HP LaserJet 3200 product so that you face its right side, and then tip the product up so that it rests on its left side. 4 Remove two screws (callout 1) from the bottom of the formatter pan. 5 Remove a third screw from the bottom of the pan (callout 2).
Note Callout 2 also shows a metal clip that helps to hold the formatter pan 96 Chapter 5 - Removal and replacement EN on the ECU pan. 2 12 Printer door removal (1 of 4) Figure 23.