• Open the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of media inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Replace the Media-Axis Motor ⇒ Page 349. • If the System Error continues, replace the PrintMech PCA ⇒ Page 384. System Error: 41:10 System Error Codes Problem Description: Electrical fault in paper motor. Corrective Action: Try the following: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.
• Check that the Media-Axis Motor cable is not damaged and is correctly connected to the PrintMech PCA. • If the System Error continues, replace the PrintMech PCA ⇒ Page 384 • Replace the Media-Axis Motor ⇒ Page 349. System Error: 42:03 Problem Description: Electrical current limit in carriage motor. Corrective Action: Try the following: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of media blocking the Carriage Assembly, then clear the obstruction.
• Clean the Encoder Strip ⇒ Page 454. • Replace the Scan-Axis Motor ⇒ Page 346. • If the System Error continues, replace the PrintMech PCA ⇒ Page 384. System Error: 42:10 Problem Description: Electrical fault in Carriage Motor or starting the Scan Axis or Homing Scan Axis. Corrective Action: Try the following: 60 Chapter 2 System Error Codes