EIO menu (networked printers) The EIO (enhanced input/output) menu appears only when an EIO device is installed in an EIO slot on the printer (such as an HP JetDirect print server). The items in the menu depend on the particular accessory product installed. If the printer contains an HP JetDirect print server EIO card, you can configure basic networking parameters using the EIO menu. These and other parameters can also be configured through HP Web JetAdmin. Table 27. EIO menu Item Values Explanation CFG NETWORK=NO NO YES Select whether or not you want to use the HP JetDirect menu. NO : Bypass the HP JetDirect menu. YES : Use the HP JetDirect menu.
You must change this to YES each time you want to use the menu. Note You must select CFG NETWORK=YES to display the following items. IPX/SPX=ON ON OFF Select whether the IPX/SPX protocol stack (in Novell NetWare networks, for example) is enabled ( ON ) or disabled ( OFF ). DLC/LLC=ON ON OFF Select whether the DLC/LLC protocol stack is enabled ( ON ) or disabled ( OFF ). TCP/IP=ON ON OFF Select whether the TCP/IP protocol stack is enabled ( ON ) or disabled ( OFF ). ATALK=ON ON OFF Select whether the Apple EtherTalk protocol stack is enabled ( ON ) or disabled ( OFF ). 70 Printer operation EN