Table 1: FRM (Field Replaceable Module) List Part No. CQ114-90035 Rev B HP Scitex FB500 / FB700 Service Manual Page 29 of 510 Part # Part Name Type Description Page CQ115-67017 FRM,FB700,MULTI CBL LO _ _ OM,SERVICE SIDE _ Elec This is the cabling loom (conduit and cables) for cables that pass between the electronics assembly to components on the service end of the FB700 printer. Only the loom bundle is available, the individual cables are not orderable.
CQ115-67018 FRM,FB700,MULTI CBL LO _ _ OM,USER SIDE _ Elec This is the cabling loom (conduit and cables) for cables that pass between the electronics assembly to components on the user end of the FB700 printer, excluding devices in the user-end removable enclosure. Only the loom bundle is available, the individual cables are not orderable. CQ115-67020 FRM,FB700,MEDIA BELT _ Med Drv This is the media-drive belt for FB700. Includes various other parts required for performing the replacement. CQ115-67027 FRM,FB700- R2R,MEDIA SPOOL ASSY _ _ R2R This is the media spool for the FB700 roll-to-roll accessory. This is the spool only, no media collets.
The spool is the same for either supply or takeup. This FRM is for a single spool. page 336 CQ115-67028 FRM,FB700- R2R,SPOOL SUPPORT _ R2R This is the media-spool stiffener or "sleeve" that is installed over the primary FB700 spool to add rigidity. The stiffener itself is 72" long. Two are used with the FB700 roll-to-roll accessory; this FRM is for qty. 1 page 336 CQ115-67029 FRM,FB700- R2R,FOAM ROLLER _ R2R This is a foam roller assembly for the FB700 roll-to-roll accessory. Two are used per printer; this FRM is for qty. 1 page 336 CQ115-67030 FRM,FB700- R2R,TAKEUP DANCER AS _ _ SY R2R This is the dancer roller bar FB700 roll-to-roll accessory.
The dancer bar is the movable bar when the takeup system is opera- tional. page 336 CQ115-67031 FRM,FB700- R2R,TAKEUP IDLER ASSY _ _ R2R This is the fixed roller bar for the FB700 roll-to-roll accessory. The fixed roller remains stationary when the takeup system is opera- tional. page 336 CQ115-67032 FRM,FB700,ACCSSORY T _ ABLE Table This is the complete accessory table for FB700. The input and out- put accessory tables are identical. This FRM is one entire table. CQ115-67033 FRM,FB700,CEN- TER,INPUT TABLE,TOP CO _ _ VER Table This is the sheet metal cover used for the FB700 standard input table only.
CQ115-67034 FRM,FB700,CEN- TER,OUTPUT TABLE,TOP C _ _ OVER Table This is the sheet metal cover used for the FB700 standard output table only. CQ115-67035 FRM,FB700,SLAM LATCH _ &PARTS Table This is a kit of parts for the slam latch for the FB700 media support tables. It includes fasteners, brackets and offset plates as well as the two latches and connecting cable. One is used per table; this FRM is for qty. 1 CQ115-67036 FRM,FB700,INPUT,TABLE T _ OP Table This is the table top assembly for the FB700 input table. CQ115-67037 FRM,FB700,OUT- PUT,TABLE TOP _ Table This is the table top assembly for the FB700 output table and the FB700 accessory tables.
CQ115-67038 FRM,FB700,OUTPUT TABL _ E,COMPLETE Table This is the complete standard output table assembly for FB700. CQ115-67039 FRM,FB700,INPUT TABLE, _ COMPLETE Table This is the complete standard input table assembly for FB700.