Appendix A USB Connection (3) The Delta PLCs which are equipped with built-in USB interfaces are listed in the tabled below. After ISPSoft version 2.00 or above is installed, the drivers for DVP-SX2 series PLCs, DVP-SE series PLCs, and AH500 series CPU modules will be in the folders denoted by the paths in the table. *. The default installation path of ISPSoft is C:\Program Files(x86)\Delta Industrial Automation\ISPSoftx.xx. Specify a path according to the PLC which is connected. If the driver for a PLC is gotten in another way, users have to specify the corresponding path. Click Next to carry on the installation.
A-3 Model Path DVP-SX2, AH560EN2 Installation path of ISPSoft\drivers\SX2 USB Driver\ _ _ DVP-SE Installation path of ISPSoft\drivers\Delta PLC USB Driver\ _ _ _ AH500 Installation path of ISPSoft\drivers\Delta PLC USB Driver\ _ _ _