Accessories Spring Set A spring is clamped at the armature by means of a screw and a disc. As the spring is mounted to the outside of the solenoid this accessory cannot be mounted to the models IP54 with bellow. Installation Note Magnetic force is reduced by spring force. The assembly is very easy, only an Allen key is required. The spring set can be used in combination with the LCL standard.
Technical Data Cross section Technical Data 21 Reset spring set for type A [mm] B [mm] C [mm] D [mm] E [mm] LCL030035 4 9 19 17 4.2 LCL040050 8.5 10.5 26 23 6.2 LCL048060 9 12 31 28 8.2 LCL060070 13 16 37.5 34 8.2 LCL070080 18 22 42.5 39 10.2 LCL030035 LCL040050 LCL048060 Stroke [mm] 5 10 15 5 10 15 20 5 10 15 25 Spring force F[N] Initial force 2.3 1.7 1.1 5.5 4.5 3.5 2.5 9.046 7.88 6.82 4.7 LCL060070 LCL070080 Stroke [mm] 5 10 15 25 5 10 15 20 30 Spring force F[N] Initial force 63.16 41.5 30.1 7.3 19.125 15.5 14.25 13 10.5