L-4533A/L-4533AW/L-4033A/L-4033AW Operation Guide Introduction Front 15 Letter Name Explanation g Feed Ready switch Starts and stops automatic feeding of the substrate. The lamp for the switch also indicates the following statuses. Lit: Ready to start automatic feeding. Off: Automatic feeding is stopped. Flashing: The winding deterioration prevention lever is raised. If the winding deterioration prevention lever is lowered, the lamp turns off. h Feeding unit Feeds the loaded substrate automatically. i Switch for changing the feed direction Changes the feed direction for the substrate. Letter Name Explanation a Front cover 1 Open when loading the substrate or performing maintenance.
Open front cover 2 to access the heater. b Front cover 2 c Front cover 3 d Control panel (Right) Switches and lamps for operating the press. U “Control panel” on page 16 e Top cover 2 Open when checking the print results, loading the substrate, or performing maintenance. The light on the other side of the cover is always on. (L-4533A/L-4533AW only) f Pilot lamp Indicates the status of the press with the four-colored pilot lamp.