L-4733A/L-4733AW Operation Guide Overview of the Product Substrate Specifications 29 Rewinder (Optional item) Rewinder Auto winding Wind-up speed When printing: 9.9 m/minute When using the Feed switch on the press: 9.9 m/minute When performing initial winding: 3 m/minute Substrate removal method Manual operation Be sure to use appropriate transport equipment such as a lifter. Safety devices Emergency stop switch:
On the press Power supply Supply from the press Possible wind-up size U “Substrate Specifications” on page 29 Substrate type Adhesive paper, adhesive paper (transparent substrate)*, laminated pouching material * When using the sensor for transparent substrates Substrate Thickness/ Substrate Width Adhesive paper: 100 to 320 μm/80 to 334 mm Adhesive paper (transparent substrate): 80 to 320 μm/200 to 334 mm Laminated pouching material: 80 to 135 μm/200 to 334 mm Maximum roll length 1000m Do not exceed the maximum value. Maximum roll mass 100 kg Do not exceed the maximum value. Maximum roll diameter 600mm Do not exceed the maximum value.
Internal core diameter 3 inch (-40/1000 inch +80/1000 inch) 76.2 mm (-1 mm +2 mm) Paper core thickness 3 to 20 mm Paper core material Paper Distance from paper core to roll edge Within ±10 mm Status inside paper core No scratches, dents, paper peeling off, soiling, adhesives, paper powder, and so on Joined paper cores You cannot use joined paper cores. Amount of telescoping Within 20 mm Substrate feed width range variation ±1 mm Flatness No creases or folds