L-6534VW Operation Guide Various Print Settings Procedure for color plate printing A Set additional printing for color plate in a preset suitable to the type of substrate loaded, and set it as the default preset. U “Necessary settings for color plate printing” on page 175 U “Creating and Editing Preset for Printing” on page 91 B Set the color plate in the preset for reverse feeding, and set it as the default preset. C Replace the substrate. U “Replacing the Unwinder Side Substrate” on page 99 U “Replacing the Rewinder Side Substrate” on page 115 U “Setting after Replacing the Substrate (Eye Mark for Reverse Feeding: Use)” on page 121 D Return the adjustment volume on the ionizer to 0.
E Check that the press switch is set to the Standby position. F Perform printing from the print application software, and then check that the print data was received on the touch panel. G Select the print job from the Job Management menu, and then press Print Settings . H Set the following, and then press OK . I Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing. Print the first copy, and then the press automatically adjusts the sensor sensitivity.
181 Item Set value Corona Treatment Apply Lead In 0 m Lead Out 0 m Print Method For Reverse White Jobs White Plate Printing Rotate 180 Degrees Apply Item Set value Copies 1 Perform Eye Mark Verification Printing Select