L-6534VW Operation Guide Overview of the Product Inside the Press (Upper Side) 24 Letter Name Explanation c Tape holder Set the tape used for splicing substrates. U “Tape Specifications” on page 68 d Display panel for the additional UV lamp curing unit Displays the operating status for the additional UV lamp curing unit. If an error occurs, check the details of the error on the touch panel of the press, and then take the appropriate action. e Additional UV lamp curing unit breaker Turns the additional UV lamp curing unit ON/OFF. f Main unit breaker Set to ON to supply power to the press. Set to OFF to stop the power supply to the press. g Top rear cover Open when performing maintenance.
h Left rear cover Open when performing maintenance. i Right rear cover Open when performing maintenance. j Maintenance tank Tank to store the ink mist generated in printing or the waste liquid discharged from the press during head maintenance and the like. k Network connector Connect the network cable. l Regulator Adjusts the air pressure for the connected air gun. Use the two air guns to fix the substrate for the unwinder and rewinder axis and for maintenance.