Last Modified: 4-30-2014 6.6 A Doc ID: RM0000018PD002X agn Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 - ] Title: ENGINE HOOD / DOOR: FRONT DOOR: DISASSEMBLY; 2006 MY LX470 [05/2005 - ] DISASSEMBLY HINT: Use the same procedures for the LH side and RH side. The procedures listed below are for the RH side. 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. 2. REMOVE FRONT DOOR FRAME BRACKET GARNISH LOWER (a) Using a screwdriver, remove the lower frame bracket garnish. HINT: Tape the screwdriver tip before use. 3.
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (a) Using a screwdriver, remove the power window switch as shown in the illustration. HINT: Tape the screwdriver tip before use. (b) Disconnect the connector. 4. REMOVE CENTER SPEAKER (w/ Mark Levinson) (a) Disconnect the connector. (b) Using a screwdriver, remove the center speaker. HINT: Tape the screwdriver tip before use. 5. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL (a) Using a screwdriver, remove the No. 2 door inside handle bezel as shown in the illustration. HINT: Tape the screwdriver tip before use. 6. REMOVE NO. 1 DOOR INSIDE HANDLE BEZEL (a) Remove the screw. (b) Using a screwdriver, remove the No.
1 door inside handle bezel as shown in the illustration. HINT: Tape the screwdriver tip before use. cardi