(b) Remove the 2 bolts and the door glass. Torque: 8.0 N·m {82 kgf·cm, 71in·lbf} NOTICE: Do not damage the door glass. HINT: Pull the glass upward to remove it. 16. REMOVE FRONT NO. 1 DOOR SPEAKER ASSEMBLY (a) Remove the 3 screws and speaker, and then disconnect the connector. (b) with Mark Levinson: Remove the 4 screws and speaker, then disconnect the connector. 17. REMOVE FRONT DOOR GLASS RUN 18. REMOVE FRONT DOOR FRAME SUB-ASSEMBLY REAR LOWER (a) Remove the bolt and frame sub-assembly rear lower. 19. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (a) Disconnect the connector, and then remove the 5 bolts for bolt B. Torque:
8.0 N·m {82 kgf·cm, 71in·lbf} (b) Loosen the bolt and the window regulator for bolt A. Torque: 8.0 N·m {82 kgf·cm, 71in·lbf} HINT: Remove the regulator through the service hole. At the time of reassembly, apply MP grease to the window regulator. NOTICE: At the time of reassembly, do not apply grease to the spring of the window regulator. 20. REMOVE FRONT DOOR LOCK ASSEMBLY (a) Remove the clip and the door lock link protector. (b) Disconnect the connector. (c) Disconnect the 2 links from the outside handle and door lock cylinder. (d) Using a "torx" wrench, remove the 3 screws and the door lock through the service hole. "Torx" wrench: T30 (Part No.
09042-00010 or locally manufactured tool) Torque: cardia gn