MAINTENANCE AND SERVICE Caution! Warning! When flushing with high pressure equipment: Do not clean the vehicle at the highest gear. VESPER ■ When the vehicle is driven immediately after being washed, apply the brakes several times to remove any moisture from the brake linings. Braking efficiency may be affected by any moisture. ■ Before washing the vehicle, check and confirm that the charging port cover and the fuel filler flap of the vehicle have been properly closed. ■ When cleaning the vehicle, avoid flushing connectors at the bottom of the vehicle with the water gun (especially the connectors of orange high voltage wiring harness).
■ Avoid using high pressure cleaner or steam cleaner to clean the sensors, so as not to damage the sensors. When cleaning the vehicle, the sensor surface should be washed with low pressure water flow for a short time and at a certain distance. ■ Vehicles must be cleaned in strict accordance to the instructions for the use of high-pressure cleaners, and special attention should be paid to working pressure and spraying distance. If a pressure cleaner is used, the nozzle must be kept at a certain distance from the surface of the vehicle body. Keep the nozzle moving and do not spray water at one place all the time. High pressure water immersion in vehicle parts may lead to chronic damage.
■ Do not flush the engine compartment directly or indirectly. High pressure water flow may cause damage to electrical components in the engine compartment or cause some components to fail to function normally. ■ When cleaning the vehicle with car wash equipment, please check whether it is suitable for your vehicle. Hand washing Use a soft sponge or towel to clean the vehicle from top to bottom. Please use neutral (special) vehicle detergent. After cleaning, rinse the vehicle body with plenty of water, and then remove the water stains with a soft towel. 268