User’s Guide Troubleshooting for Printing Paper Does Not Feed Correctly Paper does not feed Remove the stack of paper and make sure of the following: ❏ The paper is not curled or creased. ❏ The paper is not too old. See the instructions that came with the paper for more information. ❏ For plain paper, do not load paper above the line just under the H arrow mark inside the edge guide. For Epson special media, make sure the number of sheets is less than the limit specified for the media. & “Selecting Paper” on page 13 ❏ Paper is not jammed inside the product. If it is, remove the jammed paper.
& “Paper Jams” on page 50 ❏ You have followed any special loading instructions that came with your paper. Multiple pages feed ❏ For plain paper, do not load paper above the line just under the H arrow mark inside the edge guide. For Epson special media, make sure the number of sheets is less than the limit specified for the media. & “Selecting Paper” on page 13 ❏ Make sure the edge guides are snug against the edges of the paper. ❏ Make sure the paper is not curled or folded. If so, flatten it or curl it slightly toward the opposite side before loading. ❏ Remove the stack of paper and make sure that the paper is not too thin.
& “Paper” on page 62 ❏ Fan the edges of the stack to separate the sheets, then reload the paper. ❏ If too many copies of a file are being printed, check the Copies setting in your printer driver as follows, and also check in your application. For Windows, check the Copies setting on the Main window. Mac OS X, check the Copies setting in the Print dialog. Paper is improperly loaded If you have loaded the paper too far into the product, the product cannot feed the paper correctly. Turn the product off and gently remove the paper. Then turn the product on and reload the paper correctly. 57