Downloaded from https://www.everyspec.com MIL-STD-31000 purpose of addressing basic engineering drawing practices. For the purpose of addressing basic engineering drawing practices, ASME Y14.100, ASME Y14.24, ASME Y14.34, ASME Y14.35M and ASME Y14.41 should be regarded as a closely interdependent set of ASME standards. 6.6 Digital product definition data. ISO 10303 provides content and format for the exchange of digital TDPs and 3-dimension product model data in a neutral file format. The Procuring Activity should specify the required STEP Application Protocol(s) (AP) and/or a specific native CAD format as a minimum in the TDP Option Selection Worksheet based on the intended uses.
6.7 Commercial drawings. The acquisition of commercial drawings almost always involves rights in data and intellectual property issues. These issues should be clearly defined in the contract or purchase order in accordance with DFARS Parts 211 and 227. This standard and its related data item descriptions will not be used to circumvent the DFARS requirements. 6.8 Special Inspection Equipment (SIE). To be considered mandatory to the manufacture of an item, the SIE should be the only known inspection equipment that can be used to test or inspect parameters that cannot be inspected effectively with commercially available equipment. (See 5.7.3.5) 6.9 Contractors specifications.
A contractor's specifications for items such as materials or processes are considered company standards. See 3.1.5 and 5.3.3.1. 6.10 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. 6. 11 Subject term (keyword) listing. Drawings and associated lists Drawing number assignment report Packaging Product model Proposed critical manufacturing process description SIE descriptive documentation Source control drawing approval request Special tooling drawings Specifications Test requirements document 2D TDP 3D TDP TDP elements TDP level 19