Downloaded from https://www.everyspec.com NOT MEASUREMENT SENSITIVE MIL-STD-31000A 26 February 2013 SUPERSEDING MIL-STD-31000 05 November 2009 DEPARTMENT OF DEFENSE STANDARD PRACTICE TECHNICAL DATA PACKAGES This standard is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE. 1.1 This standard provides requirements for the deliverable data products associated with a technical data package (TDP) and its related TDP data management products. A TDP contains elements, is described by a level and type, and may have associated metadata and supplementary technical data. TDP contains a sub-set of product data and product data is a sub-set of technical data.

These relationships are shown in the hierarchical breakdown of data in Figure 1. Comments, suggestions, or questions on this document should be addressed to: Commander, US Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or email to usarmy.picatinny.ardec.list.ardec-stdzn-branch@mail.mil . Since contact information can change, you may want to verify the currency of this address information using the ASSIST online database at https://assist.dla.mil. AMSC 9341 AREA SESS DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Page 1

Downloaded from https://www.everyspec.com MIL-STD-31000A FIGURE 1. TDP relationships. 2. APPLICABLE DOCUMENTS. 2.1 General. The documents listed in this section are specified in sections 3, 4 and 5 of this standard. This section does not include documents listed in other sections or recommended for additional information or as examples. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. 2

Page 2

Downloaded from https://www.everyspec.com MIL-STD-31000A FEDERAL STANDARDS. FED-STD-376 Preferred Metric Units for General Use by the Federal Government DEPARTMENT OF DEFENSE STANDARDS. MIL-STD-961 Defense and Program-unique Specifications Format and Content MIL-STD-963 Data Item Descriptions (DID) MIL-STD-2073-1 Standard Practice for Military Packaging DOD-STD-2101 Classification of Characteristics (Copies of these documents are available online at http://quicksearch.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111- 5094.) 2.2.2 Other Government documents and publications.

The following other Government documents and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE MANUALS DoD Manual 4100.39M Federal Logistics Information System (FLIS) Procedures Manual DoD Manual 5220.22-M Department of Defense Industrial Security Manual for Safeguarding Classified Information.

DoD Directive 5230.24 Distribution Statements on Technical Documents DoD Directive 5230.25 Withholding of Unclassified Technical Data From Public Disclosure DoD 5010.12-M Procedures for the Acquisition of Technical Data DFARS Part 211 Defense Federal Acquisition Regulation Supplement for Describing Agency Needs DFARS Part 227 Defense Federal Acquisition Regulation Supplement for Patents, Data and Copyrights DFARS Part 252 Defense Federal Acquisition Regulation Supplement for Solicitations, Provisions and Contract Clauses FAR 11.001 Federal Acquisition Regulation, Describing Agency Needs, Definitions Federal Cataloging Commercial and Government Entity (CAGE) Handbook H4/H8 Codes 3

Page 3

Downloaded from https://www.everyspec.com MIL-STD-31000A (Applications for copies of DoD Manual 5520.22-M and DoD Directive 5230.24 are available from the Defense Technical Information Center (DTIC), http://www.dtic.mil. The Federal Cataloging Handbook H4/H8 is available from the Commander, Defense Logistics Services Center, and Battle Creek, MI 49037-3084 at http://www.dlis.dla.mil/hseries.asp. Copies of DFARS documents are available online at http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. The federal documents can be found at http://www.dtic.mil/whs/directives/.) FEDERAL PUBLICATION.

Federal Standardization Manual (Copies of Federal Standardization Manual are available from the General Service Administration, Centralized Mailing List Service (7CAFL), P.O. Box 6477, Ft. Worth, TX 76115.) 2.3 Non-Government publications. The following documents form a part of this standard to the extent specified herein. Unless otherwise specified, the issues of the documents are those cited in the solicitation.

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME Y14.1 Decimal Inch Drawing Sheet Size and Format ASME Y14.24 Types and Applications of Engineering Drawings ASME Y14.34 Associated Lists ASME Y14.35 Revision of Engineering Drawings and Associated Documents ASME Y14.41 Digital Product Definition Data Practices ASME Y14.5 Dimensioning and Tolerancing ASME Y14.100 Engineering Drawing Practices (Copies of these documents are available from http://www.asme.org/ or ASME information Central Orders/Inquiries, P.O.

Box 2300, Fairfield , NJ 07007-2300) INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE) ISO/IEC 12207 System and Software Engineering - Software Lifecycle Processes ISO 32000-1 Document Management - Portable Document Format. (Copies of this document are available from http://www.ieee.org/portal/site, or IEEE Service Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08854-1331.) AMERICAN NATIONAL STANDARDS INSTITUTE ISO 10303 Standard for the Exchange of Product model data (STEP) (Copies of free and purchased parts of the standard are available at: http://www.ansi.org/.) 4

Page 4