Operation Warning! The bottom of the receptacle which you use must not have any bumps or recesses. Before using the appliance for the first time, clean all parts of it. Blender foot The blender foot is suitable for blending mayonnaise, sauces, mixed drinks, baby food, cooked fruit and vegetables. For purйeing soups. It is recommended to use the supplied blender jug. However, other suitable receptacles can also be used. Fig. Completely unwind the power cord. Place the blender foot on the base unit and lock into position. Insert the mains plug. Place food in the blender jug or another tall receptacle. The appliance works better if there is some liquid in the ingredients.
Set the required speed with the speed control ( сбЦК -5). It is recommended to use a low speed setting for liquids, hot food and for mixing (e.g. muesli in yoghurt). The high speed settings are recommen- ded for the processing of more solid foods. Firmly hold the hand blender and jug. Switch on the hand blender by pressing the required On button. When switching on the hand blender, hold it at a slight angle to prevent it from “sticking” to the bottom of the blender jug. The hand blender remains switched on as long as the On button is pressed. To prevent the ingredients from splashing, do not press the On button until the blender foot has been immersed in the ingredients.
Always switch off the hand blender before taking it out of the processed food. Release the On button after processing. After using the appliance: Remove mains plug. Press the release buttons and remove the blender foot from the base unit. Whisk The whisk is suitable for whipping cream, beating egg whites and milk froth (from hot (max. 70 °C) and cold milk (max. 8 °C)) as well as for preparing sauces and desserts. Йе Risk of scalding! When processing hot milk, use a tall, narrow receptacle for blending. Hot milk may splash and scald you. Fig. Put ingredients into the blender jug. Place the gear attachment on the base unit and lock into position.
Insert the whisk into the gear attachment and lock into position. Warning! Never insert the whisk into the base unit without the gear attachment (Fig. = -3). Insert the mains plug. Set required speed using the speed control (recommendation: high speed). Grip base unit and blender jug and press required On button. Release the On button after processing. After using the appliance: Remove mains plug. Press the release buttons and remove the base unit from the gear attachment. Remove the whisk from the gear attachment. Robert Bosch Hausgerдte GmbH 13