Table 29. Continuable attention error secondary codes (continued) C7058-90936 Troubleshooting with control-panel messages 185 Control-panel light pattern Continuable attention error secondary message Status log code Recommended action Temporary engine error (41.x) 30034 Press GO. The page containing the error will be printed. If the error persists, reseat the connections to the laser/scanner, formatter, and engine controller. Replace the laser/scanner. Replace the formatter. Replace the engine controller. Print overrun (21) 30017 The print job was too complex for available printer memory. Press GO to resume printing.
If you lose some data, you might need to add more printer memory. For a temporary solution, simplify the image or print at a lower resolution. Buffer flow error (22) 30027 Verify that the printer cable is connected properly and fully seated at connections. Always use a high- quality cable. Some non-HP cables might be missing pin connections, or might otherwise not conform to IEEE-1284 specifications. Replace the formatter Bad connection (40) 30018 The connection between the printer and the EIO card is bad. Press Go to clear the error message and continue printing. If the error message persists, turn the printer off and reset the EIO card. Turn the printer on.
Replace the EIO card.