During the loading of a roll of paper, the printer has detected that the paper is too far to the left; it should be aligned with the blue line painted on the right side of the platen. Either : Press the Enter Or : Press the Cancel key to cancel paper loading. During the loading of a sheet, the printer cannot detect the side edge of the paper. A possible cause is that the media is transparent (clear); only non-clear media are supported. Either : Press the Enter Or : Press the Cancel key to cancel paper loading. Sheet not loaded Load sheet with printed pattern The printer is trying to perform a scan of the calibration pattern, but no sheet was found.
Load the sheet that was printed by the Message Explanation and Action 42 Front-Panel Error Messages Sheet edge not found Please check sheet edges are non-clear Press ENTER to retry Press CANCEL to abort Roll right edge too far from load line Press ENTER to retry Press CANCEL to abort Message Explanation and Action Sheet edge not found Please check sheet edges are non-clear Press ENTER to retry Press CANCEL to abort During the loading of a sheet, the printer cannot detect the side edge of the paper. A possible cause is that the media is transparent (clear); only non-clear media are supported. Either: Press the Enter key to restart the loading procedure; Or:
Press the Cancel key to cancel paper loading.