Scanning > Scanning Using the Scanner's Control Panel > Scanning Using WSD Detect Double Feed: Display a warning when multiple originals are fed at the same time. ❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. ❏ Length: Detect a double feed by the length. When the length of the second original scanned is different from the first, this is identified as a double feed. File Name: ❏ Filename Prefix: Enter a prefix for the name of the images in alphanumeric characters and symbols. ❏ Add Date: Add the date to the file name. ❏ Add Time: Add the time to the file name. Clear All Settings Resets the scan settings to their defaults. Scanning Using WSD Note:
❏ This feature is only available for computers running Windows 10/Windows 8.1/Windows 8. ❏ If you are using Windows 7, you need to setup your computer in advance using this feature. 1. Place the originals. 2. Select WSD on the home screen of the scanner’s control panel. 3. Select a computer. 4. Tap x . Setting Up a WSD Port This section explains how to set up a WSD port for Windows 7. Note: For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically. The following conditions must be met to set up a WSD port. ❏ The scanner and the computer are connected to the network. ❏ The scanner driver is installed on the computer. 1. Turn the scanner on. 2.
Click the start button on the computer, and then click Network . 121