Adding or Replacing the Computer or Devices > Connecting a Smart Device and Scanner Directly ( … 1. Select on the home screen. 2. Select Wi-Fi Direct . 3. Select Start Setup . 4. Start Epson Smart Panel on your smart device. 5. Follow the instructions displayed on the Epson Smart Panel to connect to your scanner. When your smart device is connected to the scanner, go to the next step. 6. On the scanner's control panel, select Complete .
Disconnecting Wi-Fi Direct (Simple AP) Connection There are two methods available to disable a Wi-Fi Direct (Simple AP) connection; you can disable all connections by using the scanner's control panel, or disable each connection from the computer or the smart device. When you want to disable all connections, see the related information link below for details. c Important: When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the scanner in Wi-Fi Direct (Simple AP) connection are disconnected. Note: If you want to disconnect a specific device, disconnect from the device instead of the scanner.
Use one of the following methods to disconnect the Wi-Fi Direct (Simple AP) connection from the device. ❏ Disconnect the Wi-Fi connection to the scanner's network name (SSID). ❏ Connect to another network name (SSID). Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from > Wi-Fi Direct > Start Setup > Change , and then the following menu items are displayed. Change Network Name Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the scanner to your arbitrary name.
You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the control panel. You can enter up to 22 characters. When changing the network name (SSID), all connected devices are disconnected. Use the new network name (SSID) if you want to re-connect the device. Change Password Change the Wi-Fi Direct (simple AP) password for connecting to the scanner to your arbitrary value. You can set the password in ASCII characters that is displayed on the software keyboard on the control panel. You can enter 8 to 22 characters. 186