Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Changing t … ❏ Setting up from the website Access the following website, and then enter the product name. Go to Setup , and then start setting up. http://epson.sn Selecting the Connection Methods Follow the on-screen instructions. On the Select Your Operation screen, select Set up Scanner connection again (for new network router or changing USB to network, etc.) , and then click Next . Follow the on-screen instructions to finish setup. If you cannot connect, see the following to try to solve the problem.
“Cannot connect to a Network” on page 166 Making Settings for Connecting to the Smart Device You can use the scanner from a smart device when you connect the scanner to the same Wi-Fi network (SSID) as the smart device. To use the scanner from a smart device, access the following website, and then enter the product name. Go to Setup , and then start setting up. http://epson.sn Access to the website from the smart device that you want to connect to the scanner. When Changing the Computer When changing the computer, make connection settings between the computer and the scanner. Making Settings for Connecting to the Computer We recommend using the installer to connect the scanner to a computer.
You can run the installer using the following method. ❏ Setting up from the website Access the following website, and then enter the product name. Go to Setup , and then start setting up. http://epson.sn Follow the on-screen instructions. Changing the Connection Method to the Computer This section explains how to change the connection method when the computer and the scanner have been connected. Changing from USB to a Network Connection Using the installer and re-set up in a different connection method. 188